alphonse
/
wcu-pas
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Update Laser Controller

alphonse 2025-04-06 00:56:49 +00:00
parent 7e3d92148a
commit 794b2fb40a
1 changed files with 3 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
Laser-Controller.md

@ -5,9 +5,9 @@ The PAS has 3 lasers (blue, green, and red) that are all housed in a single modu
## Definitions and conventions
* **Center Frequency:** The center frequecy should be set to the resonant frequency of the cell. The firmware will set the frequency of the green laser to the center frequency. It will set the frequency of the blue laser to the center frequency - 3 Hz and the red to the center frequency + 3 Hz. Must be an integer.
* **Blue Laser:** The laser connected to pin 0.
* **Green Laser:** The laser connected to pin 1.
* **Red Laser:** The laser connected to pin 2.
* **Blue Laser:** The laser connected to pin 1.
* **Green Laser:** The laser connected to pin 4.
* **Red Laser:** The laser connected to pin 9.
* **Frequency Sweep:** Begin at center_frequency - n Hz and increase the frequency by 1 Hz every 2 seconds until reaching center_frequency + n, where *n* is any integer. *This is not currently useful -- use the sweep software instead!*
* **Indicator LED:** By default, the Pico will flash the on-board LED when powered on. This may be turned off with `toggle.off`.
* For ADC reads, the rate is hard-coded to 10000 S/sec and 1000 samples total.